[Elecraft] PSK31 transmissions

[Don Wilhelm]

  What radio do you have?  How do you have it connected?
Everything is suspect when you first set something like this up.
Are you actually in DATA A mode (K3), or if a K2, are you in SSB mode 
(usually USB) - or RTTY mode on the K2?
Does it work with a less complex software application like Digipan?
If a K2, is your SSB carrier balance set properly? - you should have no 
carrier if it is correct?

Help with the answers to the above questions and tell us a bit more 
about how you have things set up - interface box if any, soundcard to 
K2/K3 audio connections, etc.  With that information perhaps we can 
help, or at least give you some checkpoints to look at.

73,
Don W3FPR

On 6/12/2011 11:56 AM, JULIAN BRADBERRY wrote:
> I am experiencing a problem trying to transmit PSK messages.  I had a friend work with me to determine if I was transmitting both carrier and text.  The carrier went out strong and solid but the text did not accompany the carrier.  I've checked the Codec settings, text and data setting and they are set correctly.  The signal link and power meter indicated that I was transmitting OK. But no text. I'm using ham radio deluxe version 5 and dm780.   Anybody have any ideas how to overcome this issue?  I have a hearing problem so text is the best form of communication for me.
>
> WD4FTR
>