[Elecraft] XG2 low output

[Alexey Kats]

Andrew,

One more suggestion - check if either D1 or D2 (near the output socket) are
shorted. (Tony KT0NY had somewhat similar problem recently and in his case
D2 was shorted, besides of other reasons.)

On Fri, Jul 22, 2011 at 10:29 AM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Andrew,
>
> Check to see if you have 1.22 volts at the cathode of U1.  If not,
> replace U1.
> Other than that, check the soldering (re-flow if in doubt) - there are
> just not that many components to give trouble.
>
> 73,
> Don W3FPR
>
> On 7/22/2011 9:21 AM, Andrew Moore wrote:
> > Output on my XG2 3-frequency test oscillator appears to be down (by a
> > different amount on all 3 frequencies). Tried replacing battery.
> >   Suggestions on what part(s) might be faulty?
> >
> > --Andrew, NV1B
> >
>

-- 
Alexey Kats (neko)