[Elecraft] XG2 low output

[Don Wilhelm]

Andrew,

Check to see if you have 1.22 volts at the cathode of U1.  If not, 
replace U1.
Other than that, check the soldering (re-flow if in doubt) - there are 
just not that many components to give trouble.

73,
Don W3FPR

On 7/22/2011 9:21 AM, Andrew Moore wrote:
> Output on my XG2 3-frequency test oscillator appears to be down (by a
> different amount on all 3 frequencies). Tried replacing battery.
>   Suggestions on what part(s) might be faulty?
>
> --Andrew, NV1B
>