[Elecraft] K2 Problem in NAQP

[Don Wilhelm]

  Jim,

I don't know about the FT-950, but the K2 and K3 display the frequency 
of the (suppressed) carrier - unless the K3 is used in AFSK or FSK data 
submodes when it displays the mark frequency.

Check the specifications and dial display caharacteristics of each 
transceiver before drawing conclusions that one or the other are incorrect.

2.69 kHz is very close to 2.7 kHz which is the width of a normal SSB filter.

73,
Don W3FPR

On 7/18/2011 7:20 PM, radioshoppe wrote:
> Hi,
>
> As a follow up I tested my K2 on the air with a friend.  Now both receive
> and transmit for all four filters are on the same frequency (sideband) on 15
> and 40 meters.  That issue is resolved.  However,  in the process we found
> that on both bands his radio (FT-950) is receiving and transmitting 2.69 Khz
> below my frequency.  My K2 and K3 transmit and receive to each other on the
> same frequency.  We tried changing various settings in his and my radio's
> and in N1MM and MMTTY at his location and mine with no change.
>
> It sure would be wonderful if someone could shed some light on this latest
> head scratcher.  My thanks to everyone for all their responses to my initial
> problem.   73,
>
>