[Elecraft] connecting an external preamp for 6m

[ea3aky]

Thanks Jim

I checked before the cables and apparently were good, but i've changed the
one at RXOUT and it was not good !
Now its working fine.

Cu on 6m

73 Josep 

-----Mensaje original-----
De: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] En nombre de Jim Brown
Enviado el: viernes, 08 de julio de 2011 19:57
Para: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] connecting an external preamp for 6m

On 7/8/2011 8:33 AM, ea3aky wrote:
> 'm trying to connect a 6m preamp in RX ANT IN / OUT and can't get it 
> working, it's not receiving anything.

My external preamp, an ARR GaSFET unit, is connected between RXOUT and RXIN.

Connect RXOUT to the INPUT of the preamp, connect RXIN to the OUTPUT of the
preamp.  It will work with whichever antenna you have selected (that is,
either ANT1 or ANT2).  And, of course, make sure that your cables are good.

73, Jim K9YC.
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html