[Elecraft] connecting an external preamp for 6m

[Greg]

And of course you must tap the RX ANT button so that RX is showing on 
the LCD.

Greg


On 7/8/2011 10:57 AM, Jim Brown wrote:
> On 7/8/2011 8:33 AM, ea3aky wrote:
>> 'm trying to connect a 6m preamp in RX ANT IN / OUT and can't get it
>> working, it's not receiving anything.
> My external preamp, an ARR GaSFET unit, is connected between RXOUT and
> RXIN.
>
> Connect RXOUT to the INPUT of the preamp, connect RXIN to the OUTPUT of
> the preamp.  It will work with whichever antenna you have selected (that
> is, either ANT1 or ANT2).  And, of course, make sure that your cables
> are good.
>
> 73, Jim K9YC.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>