[Elecraft] Remote encoder?

[Doug Turnbull]

Ken and Eric,
    This encoder looks good but lacks buttons for activating the CW/SSB
memories which for me is the biggest advantage of a remote pod.   I use
these memories all the time in normal operation as they save time, effort
and voice.   A pod would be much easier to access than the small buttons on
the K3.   I also have an Orion II with pod and find it most helpful!   Even
in contests where WinTest and the Micro Keyer II do most of the work it
would be most useful to be able to access the K3 memories for some extra
messages but as I have learned it can cause problems to just stab your
finger at the radio in the heat of a contest.   A pod has more limited
possibilities for getting into trouble and can be conveniently placed on the
operating desk.

     Well this is an old talking point for me and I suppose Elecraft is so
busy that it will remain on a back burner.   We are a demanding lot but
TenTec does it so why not emulate the best of what is available from TT.
Meanwhile the K3 is number one radio in this shack.

               73 Doug EI2CN   

-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Ken Alexander
Sent: 22 February 2011 05:01
To: elecraft at yahoogroups.com; Elecraft_K3 at yahoogroups.com;
k3contesters at yahoogroups.co.uk; elecraft at mailman.qth.net; Eric Rosenberg
Subject: Re: [Elecraft] Remote encoder?

Hi Eric,

Try here:

http://www.g4ilo.com/ktune.html

It was designed for a K3 but I've been thinking of trying this with my K2.

73,

Ken Alexander
VE3HLS


--- On Mon, 2/21/11, Eric Rosenberg <ericrosenberg.dc at gmail.com> wrote:

> From: Eric Rosenberg <ericrosenberg.dc at gmail.com>
> Subject: [Elecraft] Remote encoder?
> To: elecraft at yahoogroups.com, Elecraft_K3 at yahoogroups.com,
k3contesters at yahoogroups.co.uk, elecraft at mailman.qth.net
> Date: Monday, February 21, 2011, 10:18 PM
> One of the nicest features of the
> Orion (and previous Ten Tec rigs) is 
> the availability of a remote encoder - a tuning knob off
> the rig.  Over 
> the years, they've ranged from the encoder (tuning knob) by
> itself, or, 
> in its present incarnation, a tuning knob and keypad.
> 
> Is there an equivalent for the K3 (presumably a third-party
> developed item)?
> 
> Thanks,
> Eric W3DQ
> Washington, DC
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html