[Elecraft] AFSK -> PSK problem

[Bill Conkling]

I think you'll find that "Digital mode info" is stored with the 'Band'.
Also, as you get setup for a contest, go thru the bands you'll be using and
select the mode, and press "A>B" twice and it will set the freq and mode
info on "B" same as "A". Much easier when later you need to go 'split', this
step will be done and you won't get err msg when trying to go split.  This
is for K3 without "Sub-receiver".  With KRX3, "I know nothing"!

...bill  nr4c

-----Original Message-----
From: Joe [mailto:joe at k2uf.com] 
Sent: Sunday, February 13, 2011 10:32 PM
To: elecraft at mailman.qth.net
Subject: [Elecraft] AFSK -> PSK problem

During the WPX RTTY contest this weekend I have noticed that my K3 will jump
from AFSK A to PSK D.  It happens whenever I change bands.  I know it
happens at other times but did not note the circumstances during the
contest.  Anyone else notice this?  Any ideas?

Other than this my K3-P3/N1MM/MMTTY configuration works great.  With the P3
I did not even have to have the phones on just watched and tuned to the
scope display.  I only got a couple of hundred Q's. It was not a serious
effort and I just picked low hanging fruit ;o}

73 Joe K2UF 

No trees were harmed in the sending of this e-mail; however, many electrons
were inconvenienced.



______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html