[Elecraft] using P3 and Skimmer

[Guy Olinger K2AV]

Certainly looks good from here....

73, Guy.

On Tue, Aug 30, 2011 at 4:22 PM, Edward R. Cole <kl7uw at acsalaska.net> wrote:

> After a lot of research and questions to Elecraft and others, I
> decided to go with two LP-Pan for my dual-polarity diversity-Rx
> system that is also called an adaptive polarity system.
>
> I chose the install the LP internal preamp option since I will be
> doing eme level signals.  The LP-Pan interface nicely with the
> emu0202 soundcard for single receiver work and with the Delta-44 for
> dual receiver tasks.  In the later DSP is done by Linrad sw fed by
> the Delta-44.  details with block diagram:
> http://www.kl7uw.com/LINRAD.htm
>
> I outline how I slaved one of the LP-Pan to the xosc in the other so
> they would be phase locked together, and how I exported the IF from
> the sub-Rx in the K3.
>
>
> 73, Ed - KL7UW, WD2XSH/45
> ======================================
> BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
> EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
> DUBUS Magazine USA Rep dubususa at gmail.com
> ======================================
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>