[Elecraft] using P3 and Skimmer

[Edward R. Cole]

After a lot of research and questions to Elecraft and others, I 
decided to go with two LP-Pan for my dual-polarity diversity-Rx 
system that is also called an adaptive polarity system.

I chose the install the LP internal preamp option since I will be 
doing eme level signals.  The LP-Pan interface nicely with the 
emu0202 soundcard for single receiver work and with the Delta-44 for 
dual receiver tasks.  In the later DSP is done by Linrad sw fed by 
the Delta-44.  details with block diagram:
http://www.kl7uw.com/LINRAD.htm

I outline how I slaved one of the LP-Pan to the xosc in the other so 
they would be phase locked together, and how I exported the IF from 
the sub-Rx in the K3.


73, Ed - KL7UW, WD2XSH/45
======================================
BP40IQ   500 KHz - 10-GHz   www.kl7uw.com
EME: 50-1.1kw?, 144-1.4kw, 432-100w, 1296-60w, 3400-?
DUBUS Magazine USA Rep dubususa at gmail.com
======================================