[Elecraft] KRX3

[Guy Olinger K2AV]

I wonder if Mike was having trouble finding the "rf cal" position.  That
should be found by turning the VFO A knob CLOCKWISE from the NOR setting
that you find it on when you select VCO MD in the config menu.    73, Guy.

On Mon, Sep 27, 2010 at 10:32 AM, Don Wilhelm <w3fpr at embarqmail.com> wrote:

>  Mike,
>
> Read the manual menu chart of menu explanations and you will discover
> better than I can tell you.
> If you set it back to NOR 127, then exit the menu and change bands, it
> will be restored to the prior settings.
>
> Since the calibration is more or less automatic, I see no problem in
> re-doing the calibration, so (in TECH MODE) set it to CAL and exit the
> menu - it will be done.
>
> 73,
> Don W3FPR
>
> On 9/27/2010 10:02 AM, VE3WDM wrote:
> > Don'
> >   Have I changed any of the synthesizer settings when I rotated the VFO
> knob
> > earlier and changed the RF settings. I was not sure if I also changed the
> > NOR setting in this menu either? But I hope with the MD setting to off
> > nothing was changed.
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>