[Elecraft] KRX3

[Don Wilhelm]

  Mike,

Read the manual menu chart of menu explanations and you will discover 
better than I can tell you.
If you set it back to NOR 127, then exit the menu and change bands, it 
will be restored to the prior settings.

Since the calibration is more or less automatic, I see no problem in 
re-doing the calibration, so (in TECH MODE) set it to CAL and exit the 
menu - it will be done.

73,
Don W3FPR

On 9/27/2010 10:02 AM, VE3WDM wrote:
> Don'
>   Have I changed any of the synthesizer settings when I rotated the VFO knob
> earlier and changed the RF settings. I was not sure if I also changed the
> NOR setting in this menu either? But I hope with the MD setting to off
> nothing was changed.