[Elecraft] K3 Split function

[Don Wilhelm]

  Norm,

Split is not available if QRQ is set on.  RIT/XIT do not work in QRQ 
mode either, but Wayne has promised a limited range RIT sometime in the 
future.  The SHIFT will not function either - see the firmware release 
notes for  version 4.03.

Go to CONFIG: CW QRQ in the menu and set it to OFF and you will have 
split back again.
If you value QRQ more than split, you will have to live with the 
limitations.

73,
Don W3FPR

On 9/23/2010 4:08 AM, Norm & Shirley Greenaway wrote:
> Hi people
>
> Need help. My split function to tx on VFOB. Not function on cw. Works ok on
> SSB
>
> VFO B frequency shows a + sign after and when press split says N/A QRQ
>
> Any ideas of what may have gone wrong
>
>
>
> Thanks
>
> Norm VK4NP
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>