[Elecraft] K3 - CONFIG question

[Val]

Tom,

I am using SD contest logger, where 2 stop bits were set by default for K3. 
That's why now I set N1MM on my second computer the same way. Actually 
K3-N1MM connection works fine here with 1 or 2 stop bits set, no difference.

73 Val LZ1VB



> Val -- That is good information, but why 38400/N/8/2 ? My manual says the
> stop-bits should be set to '1' ? Is your keying working with N1MM the way
> you have it?
>
> 73,
> Tom - W4BQF
> Subject: Re: [Elecraft] K3 - CONFIG question
>
> Poul-Erik,
>
> I have here K3 PTT-KEY as OFF-DTR and N1MM as 38400, N,8,2, DTR-CW,
> RTS-Always Off.
>
> 73 Val LZ1VB
>
>
>>What are the correct settings of the K3 and of N1MM for keying (CW) the K3
>>from N1MM?
>>Sorry if this has been answered in the past - if so pse just a link.
>>Poul-Erik, OZ4UN