[Elecraft] K3 - Can't seem to make LINE-OUT work properly

[Dan]

Thank you Don for your quick reply.
 
However, I HAVE it set to 'nor' and it still is dependent on AF levels. I
have tried to switch it to Phones just to see what difference it makes and I
see no difference. I am hooked up to jack on KIO3 which is closest to the
side panel with a stereo cable connected to my LINE IN of my computer (Win
XP Pro). Still gives widely varying inputs to the computer when AF is
rotated.
 
Believe me, I have checked the manual in many places, including the pictures
on page 4 and page 57 and page 20 before I emailed.
 
Checking MIC + LIN it says 'not appl'- not sure what this is or why it says
this. Is this relevant to the question?
 
Dan NM3A



-----Original Message-----
From: Don Wilhelm <w3fpr at embarqmail.com>
To: Dan <nm3a at mail.com>
Cc: elecraft at mailman.qth.net
Sent: Mon, Sep 13, 2010 12:01 am
Subject: Re: [Elecraft] K3 - Can't seem to make LINE-OUT work properly

Dan, 
 
See the manual page 57. If you have LIN OUT = Phones, the output level will
be controlled by the AF Gain Control. 
Set it to "nor" which will be a fixed level dependent only on the menu
parameter value. 
 
73, 
Don W3FPR 
 
On 9/12/2010 7:43 PM, Dan wrote: 
> I am having the same problem. Hooked up to Line Out, set LIN OUT = nor
> 010, 
> but line output still dependent on AF gain setting. Only have main RX, not 
> SUB installed. 
> 
> Works well with fl Digi, but must set AF gain for it to work. 
> 
> Anyone else have any ideas? 
> 
> Dan, NM3A 
-- 
View this message in context: http://elecraft.365791.n2.nabble.com/K3-Can-t-seem-to-make-LINE-OUT-work-properly-tp3888248p5524659.html
Sent from the [K3] mailing list archive at Nabble.com.