[Elecraft] K3 RTTY

[Ken Chandler]

Hi Don
You are correct.
After chk'g config fsk pol it was indeed set to zero ie for reverse mode, have now re-set to one (1)

Thanks you.

Ken..G0ORH k2 k3 p3

CW4EVER

Sent from my iPhone

     


On 12 Sep 2010, at 13:45, Don Wilhelm <w3fpr at embarqmail.com> wrote:

> Ken,
> 
> If you were receiving him OK, your sideband selection was correct.
> However, you said you were using FSK D data mode.  The polarity of your transmitted signal depends not only on the sideband you have selected, but also depends on the setting of CONFIG: FSK POL.  If you have that parameter set to "0", the transmit signal will be inverted.
> 
> The setting of CW rev is independent of DATA mode settings.
> 
> 73,
> Don W3FPR
> 
> On 9/12/2010 6:13 AM, ken chandler wrote:
>> Hi Gang
>> 
>> Have just worked VQ9LA on 15m RTTY in DATA MD, FSK D. 45 bps it decodes very
>> well, using my Morse key.
>> 
>> I tried working him for 10 minutes with 100w, he then works me and told me
>> I'm in reverse mode and he twigged as he knew I was calling so he went
>> reverse his end and worked me.
>> 
>> I have not selected reverse mode on my K3
>> 
>> The radio is in DATA and LSB.
>> 
>> After the qso I pressed the MODE button and noticed that CW was in REV ie
>> rev cw, would this throw the RTTY into reverse mode.
>> 
>>