[Elecraft] Speaker connection

[Richard S. Lindzen]

Yup, that was the problem.  I feel a bit stupid, but its hard to keep 
track of all the configurable possibilities.

73, Dick WO1I

At 09:29 AM 9/9/2010, John E. Reiser wrote:
>Hi Dick,
>
>Did you check that Config: Spkrs is set to 2?  This happened to me, 
>and I didn't remember changing it to 1 from the 2 it had been set 
>to.  Like you, I checked all the connections first before I checked Config _hi!
>
>73 John, W2GW
>
>
>----- Original Message ----- From: "Richard S. Lindzen" <rlindzen at MIT.EDU>
>To: "Elecraft Reflector" <elecraft at mailman.qth.net>
>Sent: Wednesday, September 08, 2010 10:14 PM
>Subject: [Elecraft] Speaker connection
>
>
>>I have a pair of KLH speakers connected to the rear speaker jack on
>>my K3 (#911).  They were working fine, but I just noticed that the
>>left speaker (connected to the middle section of the plug) ceased
>>functioning.  I tested the speakers and they are working, and I
>>checked the connections to the plug which also checked out okay.  The
>>built in speaker on the K3 works fine as do headphones.  Has anyone
>>run into this problem?  I'll try a different plug, but somehow I
>>suspect that the K3 is no longer providing output to the left speaker.
>>
>>73, Dick
>>
>>Dick Lindzen, WO1I
>>Newton, MA USA
>>
>>______________________________________________________________
>>Elecraft mailing list
>>Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>Help: http://mailman.qth.net/mmfaq.htm
>>Post: mailto:Elecraft at mailman.qth.net
>>
>>This list hosted by: http://www.qsl.net
>>Please help support this email list: http://www.qsl.net/donate.html
>