[Elecraft] Speaker connection

John E. Reiser reiserj at optonline.net
Thu Sep 9 09:29:06 EDT 2010


Hi Dick,

Did you check that Config: Spkrs is set to 2?  This happened to me, and I 
didn't remember changing it to 1 from the 2 it had been set to.  Like you, I 
checked all the connections first before I checked Config _hi!

73 John, W2GW


----- Original Message ----- 
From: "Richard S. Lindzen" <rlindzen at MIT.EDU>
To: "Elecraft Reflector" <elecraft at mailman.qth.net>
Sent: Wednesday, September 08, 2010 10:14 PM
Subject: [Elecraft] Speaker connection


>I have a pair of KLH speakers connected to the rear speaker jack on
> my K3 (#911).  They were working fine, but I just noticed that the
> left speaker (connected to the middle section of the plug) ceased
> functioning.  I tested the speakers and they are working, and I
> checked the connections to the plug which also checked out okay.  The
> built in speaker on the K3 works fine as do headphones.  Has anyone
> run into this problem?  I'll try a different plug, but somehow I
> suspect that the K3 is no longer providing output to the left speaker.
>
> 73, Dick
>
> Dick Lindzen, WO1I
> Newton, MA USA
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> 




More information about the Elecraft mailing list