[Elecraft] Remote with K3

[Iain MacDonnell - N6ML]

Unfortunately, though, (AFAIK) there is no way to set the "line in"
level remotely. Selecting "line-in" for MIC-SEL and then using the
"MG" command does not do it.

    ~Iain / N6ML


On Tue, Sep 7, 2010 at 8:59 AM, Alan Bloom <n1al at cds1.net> wrote:
> "MG" = mic gain.  "CP" = speech compression.  See K3 Programmer's
> Reference manual.
>
> Al N1AL
>
>
> On Tue, 2010-09-07 at 15:39 +0000, Ron Lodewyck wrote:
>> I am setting up to remote control the K3 over the Internet. With its
>> extensive software command set, the K3 is a great rig for remote
>> control.  However, I cannot find commands to control the level of either
>> Microphone Gain or Compression.  What am I overlooking?
>>
>> In addition, I had hoped the K3 would have a built-in Watchdog Timer - a
>> menu settable maximum key-down time.  From a few seconds to at least ten
>> minutes.  This is essential for remote operation to prevent accidental
>> key-down - for example, if the computer crashes or sends an erroneous
>> command.  Both have happened here during local testing, so I feel a
>> watchdog timer is critical to safe remote operation of the station.  Is
>> there such a timer in the K3 which I have missed?
>>
>> Thanks & 73,
>> Ron N6EE
>>
>>
>>
>>
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>