[Elecraft] Remote with K3

[Alan Bloom]

"MG" = mic gain.  "CP" = speech compression.  See K3 Programmer's
Reference manual.

Al N1AL


On Tue, 2010-09-07 at 15:39 +0000, Ron Lodewyck wrote:
> I am setting up to remote control the K3 over the Internet. With its 
> extensive software command set, the K3 is a great rig for remote 
> control.  However, I cannot find commands to control the level of either 
> Microphone Gain or Compression.  What am I overlooking?
> 
> In addition, I had hoped the K3 would have a built-in Watchdog Timer - a 
> menu settable maximum key-down time.  From a few seconds to at least ten 
> minutes.  This is essential for remote operation to prevent accidental 
> key-down - for example, if the computer crashes or sends an erroneous 
> command.  Both have happened here during local testing, so I feel a 
> watchdog timer is critical to safe remote operation of the station.  Is 
> there such a timer in the K3 which I have missed?
> 
> Thanks & 73,
> Ron N6EE
> 
> 
> 
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html