[Elecraft] K3 audio speaker jack

[Eugene Balinski]

All,

    Ok then,  so the optimal solution then would be to
build a stereo to mono adapter where one side of the stereo
audio and the ground would get wired to a mono jack (pick
your size)tip and ring for use by the mono speaker, and the
other audio channel from the stereo connector would be
connected to ground via an 8 ohm, 2W resistor.  In that
manner, all parts of the audio amplifier are properly
terminated.  

73

Gene K1NR
K2 6Kxx

On Wed, 27 Oct 2010 16:48:57 -0000
 "Ken Kopp" <k0pp at rfwave.net> wrote:
> The RS adapter will merely move the point
> where the short occurs. The one channel of 
> the stereo adapter will still be shorted by the 
> mono plugs on the speaker/s.
> 
> 73! Ken Kopp - K0PP
>        ElecraftCovers at rfwave.net
> 
> 
>
______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list:
> http://www.qsl.net/donate.html

---------------------------------------------------------------------
Web mail provided by NuNet, Inc. The Premier National provider.
http://www.nni.com/