[Elecraft] K3 AGC dead spot

[Greg]

  Also check you CONFIG SMTR MD.  May be on ABS vice NOR??

73
Greg


On 10/20/2010 8:50 PM, Vic K2VCO wrote:
> My guess is that you need to do the RF Gain Calibration procedure with the K3 utility. If
> you have an XG1 or XG2 you can use it as a calibrated source, or if not you can tell the
> utility to use the factory default settings.
>
> On 10/20/2010 8:13 PM, Mike wrote:
>> Tonight I noticed that from about 2:00 to 2:30 on the RF gain encoder, the receiver
>> goes dead. It's not dependent on the THR or SLP settings which I adjusted to match
>> some advice given here short time past.
>>
>> I also realized my S-meter doesn't rise as the RF gain is reduced. I like that, but I
>> don't know how it got that way. :-P
>>
>> I have the latest firmware.
>>
>> It's not really a big deal, but is is puzzling.
>>
>> 73, Mike NF4L
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>