[Elecraft] K3 AGC dead spot

[Vic K2VCO]

My guess is that you need to do the RF Gain Calibration procedure with the K3 utility. If 
you have an XG1 or XG2 you can use it as a calibrated source, or if not you can tell the 
utility to use the factory default settings.

On 10/20/2010 8:13 PM, Mike wrote:
> Tonight I noticed that from about 2:00 to 2:30 on the RF gain encoder, the receiver
> goes dead. It's not dependent on the THR or SLP settings which I adjusted to match
> some advice given here short time past.
>
> I also realized my S-meter doesn't rise as the RF gain is reduced. I like that, but I
> don't know how it got that way. :-P
>
> I have the latest firmware.
>
> It's not really a big deal, but is is puzzling.
>
> 73, Mike NF4L
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


-- 
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/