[Elecraft] K3 config menu problem

[Juha Kasari]

Tnx.

I did like you said just before I read your message ;).

Now config menu Is OK!!!!

Thank you everybody for helping.

juha

2010/10/18 Dick Dievendorff <dieven at comcast.net>

> Current production firmware is
>
> MCU 04.12
> FPF 01.13
> DSP 02.60
>
> On the firmware tab of the K3 Utility, check the "copy new files from
> Elecraft into local folder" and click "check versions now".
> This should fetch the current firmware into your computer.  Then press
> "Send
> All Firmware".
>
> Dick, K6KR
>
>
> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Juha Kasari
> Sent: Monday, October 18, 2010 8:12 AM
> To: Wayne Burdick
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] K3 config menu problem
>
> Hello,
>
> I have now
>
> MCU  04.12
> FPF   01.09
> DSP1 02.58
>
> I used "Send All Firmware to K3". Is these ok?
>
> juha
>
> 2010/10/18 Wayne Burdick <n6kr at elecraft.com>
>
> > Juha,
> >
> > You probably have the wrong revision of the "FPF" firmware file loaded.
> > When you load firmware, be sure to load all files, including FPF.
> >
> > 73,
> > Wayne
> > N6KR
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>