[Elecraft] K3 config menu problem

[Dick Dievendorff]

Current production firmware is

MCU 04.12
FPF 01.13
DSP 02.60

On the firmware tab of the K3 Utility, check the "copy new files from
Elecraft into local folder" and click "check versions now".
This should fetch the current firmware into your computer.  Then press "Send
All Firmware".

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Juha Kasari
Sent: Monday, October 18, 2010 8:12 AM
To: Wayne Burdick
Cc: elecraft at mailman.qth.net
Subject: Re: [Elecraft] K3 config menu problem

Hello,

I have now

MCU  04.12
FPF   01.09
DSP1 02.58

I used "Send All Firmware to K3". Is these ok?

juha

2010/10/18 Wayne Burdick <n6kr at elecraft.com>

> Juha,
>
> You probably have the wrong revision of the "FPF" firmware file loaded.
> When you load firmware, be sure to load all files, including FPF.
>
> 73,
> Wayne
> N6KR
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html