[Elecraft] [K3][P3] No data decode in K3 Utility?

John Nelson john at happyvalleybiz.com
Tue Oct 5 15:04:54 EDT 2010


  I have the same problem, except that I get no decode display 
whatsoever on the K3 Terminal program even with the P3 off (except 
occasional lines of gibberish)!  Display on the K3 VFO B is fine, as is 
text transmission from the K3 Terminal program to the K3.  I am using 
the newer FTDI based Sabrent USB to serial adapter.  I know I'll need to 
wait for the TB command implementation, but I'm suspicious that decode 
does not work even with the P3 off.

John W3DN


On 10/5/2010 2:47 PM, Alan Bloom wrote:
> Currently the K3 Utility's text decode display does not work when the P3
> is turned on.  That is because it uses the old K3 "TT" (Text to
> Terminal) command which is not supported by the P3.  K3 Utility is going
> to be modified to support the new "TB" (Buffered Text) command so that
> it can display text with the P3 connected.  (TB actually works better
> than TT even without the P3.)  I'm not sure what the time frame is for
> that.  Perhaps Dick can comment when he returns from vacation.
>
> Alan N1AL
>
>
> On Tue, 2010-10-05 at 12:12 -0500, Oscar Staudt wrote:
>> When P3 is turned off, I start the K3 Utility, and I will see my text decode
>> data (both CW and PSK) in the VFO B window, and in the K3 Utility Terminal
>> window.  However, when the P3 is turned on, the data is still shown in the
>> VFO B window, but does not show up on the K3 Utility Terminal screen.
>>
>> K3:  4.112
>> P3:  00.36
>>
>> I thought I read something about this on the reflector recently, but I've
>> been searching and can't find it.  I don't remember if this was a firmware
>> glitch to be fixed, or ...?
>>
>> Thanks gang!
>>
>> Oscar, WB5GCX
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: http://www.qsl.net/donate.html
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>



More information about the Elecraft mailing list