[Elecraft] K3 Micro Manual iPhone App

Wayne Burdick n6kr at elecraft.com
Thu Nov 25 02:50:23 EST 2010


This is a great service to K3 owners with iGear, Mike -- thanks. 

I'll put you on the short list for owner's manual update notices. 

73,
Wayne
N6KR

----
http://www.elecraft.com

On Nov 24, 2010, at 5:42 PM, Michael Downs <ks7d at verizon.net> wrote:

> If you are a K3 owner/operator, you may be interested in a new iPhone application. I call it the K3 Micro Manual as it incorporates most of the K3 Owner's Manual in a handy iPhone format. It is compatible with iPhone (iOS 3.1.3 and later), iPod Touch and iPad. It has been updated to include the Owner's Manual Errata, and all firmware changes since the Owner's Manual was published. Thus, it is current through November 14, 2010. In addition, I have included operating tips from the Elecraft web site, selected emails from the Elecraft Reflector,  and  operating experience.
> 
> If you think you may be interested in this app, it is now available in the Apple App Store. It is listed under the Reference category. Just search for "K3 Owners Manual" or "ks7d."  I welcome your input on enhancements to this application, and for your favorite operating tips. I plan updates over time to this app to keep it current with the latest Elecraft Owner's Manual, and to add new features.
> 
> Following is the table of contents for the app:
> 
> K3 Micro Manual Table of Contents:
> 
> Overview of Application
> Introduction
> Key to Symbols
> Table of Contents
> 
> Controls and Connectors
> Introduction
> Primary Controls
> Display
> Multi-Function Controls
> Keypad
> Memories
> VFOs
> RIT/XIT
> Rear Panel Connectors
> KIO3 Connectors
> KXV3 Connectors
> 
> Quick-Start
> Introduction
> Connections
> The Basics
> Filter Controls
> Voice Modes
> CW Mode
> Data Modes
> VFOs and RIT/XIT
> Transmit, ATU and Ant
> NB, NR and Notch
> SPLIT, BSET and SUB
> Memories, Messages and DVR
> Menus and Switch Macros
> Other Features
> 
> Basic Operation
> Fundamentals
> Receiver Setup
> Reducing Interference
> Transmitter Setup
> Voice Modes
> CW Mode
> Data Modes
> 
> Advanced Operation
> Text Decode and display
> CW-to-DATA
> Tuning Aids: CWT and SPOT
> Audio Effects (AFX)
> Dual Passband CW Filtering
> Receive Audio EQ
> Transmit Audio EQ
> SPLIT and Cross-Mode
> Extended Single Sideband (ESSB)
> General-Coverage RX
> VFO B Alternate Displays
> Alarm and Auto Power-On
> Using the Sub Receiver
> Receive Antenna In/Out
> Buffered I.F. Output
> Using Transverters
> Scanning
> 
> Remote Control
> Introduction
> Remote-Control Commands
> Front-Panel Switch Macros
> Remote Power On/Off
> Automatic Antenna Control
> CW/DATA Terminal Applications
> K3 Memory Editor
> 
> Options and Accessories
> Introduction
> Options and Accessories
> 
> Firmware Upgrades
> Introduction
> Checking your Firmware Revision
> K3 Firmware Self-Test
> Forcing a Firmware Download
> 
> Configuration
> Introduction
> Crystal filter Setup
> Option Module Enables
> Miscellaneous Setup
> 
> Calibration Procedures
> Introduction
> Synthesizer
> Wattmeter
> Transmitter Gain
> Reference Oscillator
> FP Temp Sensor
> PA Temp Sensor
> S-Meter and RF Gain
> 
> MAIN Menu Functions
> Introduction
> AFX MD
> ALARM
> ...
> ANTIVOX
> 
> CONFIG Menu Functions
> Introduction
> 2 TONE
> ADC REF
> ...
> XVn ADR
> 
> Troubleshooting
> Common Symptoms
> Parameter Initialization
> Module Troubleshooting
> Error Message List
> 
> Operating Tips
> Introduction
> CW/DX Operating Scenario
> Using TX TEST
> AFX (Audio Effects)
> RTTY Operation w/o PC
> VFO B Display Modes
> Add Text to ANT1/ANT2
> RIT/XIT Techniques
> Setup for PSK
> QRO/Battery Operation
> Adjust ATU L-C Settings
> RIT with VFO A Knob
> KK7P Explains NR
> Menu Help Text
> Operating at 500 kHz
> FW Load Failure Recovery
> Operating in Split Mode
> 60 Meter Band Operation
> 
> Firmware Release Notes
> Introduction
> MCU 4.14/DSP 2.60
> MCU 4.13/DSP 2.60
> MCU 4.12/DSP 2.60
> MCU 4.06/DSP 2.60
> MCU 4.05/DSP 2.60
> MCU 4.03/DSP 2.60
> MCU 3.97/DSP 2.58
> MCU 3.94/DSP 2.54
> MCU 3.84/DSP 2.54
> 
> Hopefully, I can follow this iPhone version with a version for Android phones. I need to get an Android phone to test the application on before it is released. Testing in the emulator is fine, but it must be checked out on actual hardware before release.
> 
> 73,
> Mike ks7d
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html


More information about the Elecraft mailing list