[Elecraft] turn off head phone monitoring

[Ian Maude]

That's a really nice idea Ian :)

73 Ian
--
Ian J Maude, G0VGS
SysOp GB7MBC & HB9DRV-9 DX Clusters
Member RSGB, GQRP 9838, FISTS 14077 | K3 #455
http://www.m0scg.org.uk



On 23 November 2010 07:46, Ian White GM3SEK <gm3sek at ifwtech.co.uk> wrote:

> N5GE wrote:
> >There is no switch to turn the monitor on or off.  If you don't want to
> >here it set it to zero.
> >
>
> There are many situations such as club, contest and special event
> stations where a loudspeaker is needed for RX, while the operator also
> needs a low-level monitor signal into the headphones for TX.
>
> Is there any way to switch off the monitoring feed to the speaker(s) to
> avoid feedback, while leaving it available as usual in the headphones?
>
> It is always bad practice to monitor a live microphone transmission
> through a  speaker, because even low levels of acoustic feedback will
> affect the signal quality. The default for all voice modes should be to
> mute the LS channel automatically while transmitting.
>
>
> --
>
> 73 from Ian GM3SEK
> http://www.ifwtech.co.uk/g3sek
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>