[Elecraft] P3 not displaying any signal {wexp3}

[DL2FI. Peter]

Ron,

do you see the baseline? If not it´s probably a wrong adjusted reference
Level. This happened to me, when I started

73/2 de Peter, DL2FI

> -----Ursprüngliche Nachricht-----
> Von: elecraft-bounces at mailman.qth.net [mailto:elecraft-
> bounces at mailman.qth.net] Im Auftrag von Ron Hahn (EI2JP)
> Gesendet: Dienstag, 9. November 2010 21:40
> An: elecraft at mailman.qth.net
> Betreff: [Elecraft] P3 not displaying any signal {wexp3}
> 
> Greetings Fellow Elecrafters,
> 
> With great anticipation I finally got around to assembling my P3 (SN
> 211) last weekend.  Assembly went great and power on tests were
> encouraging.
> 
> Unfortunately, it fails to display any output from the IF output port
> on my K3.  Nothing.  Every function seems to work just fine except that
> S9 signals on 30m (freq displayed OK) do not show anything on the
> display.
> 
> So, I first thought that maybe I had a bad interconnect cable so tried
> another ... nothing.
> 
> Moved the frequency knob of the K3 around ... frequency display tracks
> the VFO.
> 
> Tried every function on the P3 ... everything appears to work fine.
> 
> I have not made the +10dB mod to my transverter board nor have I
> upgraded the firmware in the P3 from factory (0.28).
> 
> I am now wondering if I have a busted IF output or (sigh) a faulty P3??
> 
> Suggestions on how to troubleshoot this further please?
> 
> Ron
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html