[Elecraft] P3 not displaying any signal {wexp3}

[Stephen Prior]

Ron

Forgive the implication of stupidity :-), but you are connected to the
correct bnc connector on the back of the P3 are you?

Stephen G4SJP


On 09/11/2010 20:40, "Ron Hahn (EI2JP)" <list-elecraft at ei2jp.org> wrote:

> 
> Greetings Fellow Elecrafters,
> 
> With great anticipation I finally got around to assembling my P3 (SN 211) last
> weekend.  Assembly went great and power on tests were encouraging.
> 
> Unfortunately, it fails to display any output from the IF output port on my
> K3.  Nothing.  Every function seems to work just fine except that S9 signals
> on 30m (freq displayed OK) do not show anything on the display.
> 
> So, I first thought that maybe I had a bad interconnect cable so tried another
> ... nothing.
> 
> Moved the frequency knob of the K3 around ... frequency display tracks the
> VFO.
> 
> Tried every function on the P3 ... everything appears to work fine.
> 
> I have not made the +10dB mod to my transverter board nor have I upgraded the
> firmware in the P3 from factory (0.28).
> 
> I am now wondering if I have a busted IF output or (sigh) a faulty P3??
> 
> Suggestions on how to troubleshoot this further please?
> 
> Ron
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>