[Elecraft] Odd power/ALC problem

[Tom W8JI]

Already deleted the firmware from my computer and 
re-downloaded the firmware from the elecraft site fresh. No 
help.

----- Original Message ----- 
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: "Tom W8JI" <w8ji at w8ji.com>
Cc: <elecraft at mailman.qth.net>
Sent: Monday, March 29, 2010 10:43 PM
Subject: Re: [Elecraft] Odd power/ALC problem


> Tom,
>
> I certainly don't know what is going on with your problem, 
> but since no one else has mentioned anything like that and 
> teh current firmware has been out for a while, I would 
> guess that you have a corrupt firmware download.  I would 
> get a fresh copy from the Elecraft website and re-load it.
> No promises, but it certainly is worth a try.  If that 
> does not fix it, a note th K3support is in order.
>
> 73,
> Don W3FPR
>
> Tom W8JI wrote:
>> I have an odd power and ALC problem.
>>
>> When I load the latest firmware into my K3, it nearly 
>> quits working on USB. The power output is very low with 
>> occasional high peaks. LSB remains good.
>>
>> If I offset the filter -800 Hz, USB starts working OK.
>>
>> If I make no other changes and go back to the older 
>> firmware, the problem goes away.
>>
>> Any ideas anyone?
>>
>> Tom
>> ______________________________________________________________
>> Elecraft mailing list
>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>> Help: http://mailman.qth.net/mmfaq.htm
>> Post: mailto:Elecraft at mailman.qth.net
>>
>> This list hosted by: http://www.qsl.net
>> Please help support this email list: 
>> http://www.qsl.net/donate.html
>> ------------------------------------------------------------------------
>>
>>
>> No virus found in this incoming message.
>> Checked by AVG - www.avg.com Version: 9.0.791 / Virus 
>> Database: 271.1.1/2777 - Release Date: 03/29/10 02:32:00
>>
>>