[Elecraft] Odd power/ALC problem

[Don Wilhelm]

Tom,

I certainly don't know what is going on with your problem, but since no 
one else has mentioned anything like that and teh current firmware has 
been out for a while, I would guess that you have a corrupt firmware 
download.  I would get a fresh copy from the Elecraft website and 
re-load it.
No promises, but it certainly is worth a try.  If that does not fix it, 
a note th K3support is in order.

73,
Don W3FPR

Tom W8JI wrote:
> I have an odd power and ALC problem.
>
> When I load the latest firmware into my K3, it nearly quits 
> working on USB. The power output is very low with occasional 
> high peaks. LSB remains good.
>
> If I offset the filter -800 Hz, USB starts working OK.
>
> If I make no other changes and go back to the older 
> firmware, the problem goes away.
>
> Any ideas anyone?
>
> Tom 
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> ------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com 
> Version: 9.0.791 / Virus Database: 271.1.1/2777 - Release Date: 03/29/10 02:32:00
>
>