[Elecraft] K2 Not Talking to Computer

[Guy Olinger K2AV]

Apparently it IS talking as you see the frequency reflected in the MM
display.  The K2 is receiving a command to display the frequency,
therefore it works TO the K2.  That you see the frequency in MM means
that the answer to the poll is being properly formatted and sent FROM
the K2.

Can you be more specific as to what is NOT happening?

73, Guy.

On Thu, Mar 25, 2010 at 5:05 PM, Louis Visconti <lviscont at verizon.net> wrote:
> I'm sure this question has been answered before, if someone could point me
> in the right direction, I would appreciate it.
> PC and K2 not talking. K2 Port ON; Computer-4800 baud, 8 data bits, no
> parity, 2 stop bits. Cable connections look good, RTS/CTS Loopback not used.
> Trying to use this setup with N1MM Logger. I can see the transceiver
> frequency in the software and it does respond to frequency changes and band
> changes, but thats all. Do I now check the voltages on the KIO2, or is there
> another place to look first?
>
> 73
> Lou, KD2MU
>
>
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>