[Elecraft] K3 Quick Split Operation?

[K6LE]

One of the Macros used as an example in the Programmers Reference does that for Up 2 :

SWT13;SWT13;FT1;UPB5;RT0;XT0;

You can modify that for Up 1:

SWT13;SWT13;FT1;UPB4;RT0;XT0;


I have them programmed on my PF1 and PF2 keys and use them all the time.

Rick
K6LE


On 3/21/2010, at 10:48 , AC6JA at aol.com wrote:

> I've been searching the archives and can't find any quick and easy way to  
> "UP 1" for Quick Split operation.
> The only way I see doing it is hitting the A>B button, then hitting  SPLIT, 
> and dialing in the frequency 1 khz above the VFO A frequency into VFO B  
> using the VFO B knob.  Is there any easier way?
> My Icom 756 ProIII has a way to go "UP 1" by holding the SPLIT button and  
> then hitting "1" and hitting SPLIT again.  Or hitting "2" to go up "2",  etc.
> Maybe this is something that can be added in a future firmware  release?
> Any info would be appreciated.
> Thanks.
> 
> Mike  AC6JA
> K3 #3215
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html