[Elecraft] K3 Diversity and mode changes

[Graham Kimbell (G3TCT)]

Don
Thanks for the clarification. I hadn't realised the sub tracked the main rx
"invisibly" as it were - I was expecting VFO B to change, but now it's
clear.
Great!
Graham

----- Original Message -----
From: "Don Wilhelm" <w3fpr at embarqmail.com>
To: "Graham Kimbell (G3TCT)" <g3tct at lineone.net>
Cc: "Elecraft reflector" <elecraft at mailman.qth.net>
Sent: Wednesday, March 10, 2010 11:22 PM
Subject: Re: [Elecraft] K3 Diversity and mode changes


> Graham,
>
> When in diversity receive, VFO A is the VFO for *both* the main and the
> sub.  While in diversity, VFO B only serves as the transmit VFO if SPLIT
> is active.  Tapping A>B is really a "no-op" step in diversity (unless
> SPLIT is on and you want to move the TX frequency to the RX frequency.
> See page 37 of the K3 manual.
>
> 73,
> Don W3FPR
>
> Graham Kimbell (G3TCT) wrote:
> > I'm playing with diversity operation and find that when I change modes
say from usb to cw, the main rx changes frequency slightly to keep the
received tone the same (as expected), but the sub rx doesn't change
frequency.
> > This is not a big deal because I can tap A->B to force the frequencies
equal, but does anyone know if this is usual or if I have something set
wrong?
> >
> > f/w 3.77
> >
> >