[Elecraft] K3 Diversity and mode changes

[Don Wilhelm]

Graham,

When in diversity receive, VFO A is the VFO for *both* the main and the 
sub.  While in diversity, VFO B only serves as the transmit VFO if SPLIT 
is active.  Tapping A>B is really a "no-op" step in diversity (unless 
SPLIT is on and you want to move the TX frequency to the RX frequency.  
See page 37 of the K3 manual.

73,
Don W3FPR

Graham Kimbell (G3TCT) wrote:
> I'm playing with diversity operation and find that when I change modes say from usb to cw, the main rx changes frequency slightly to keep the received tone the same (as expected), but the sub rx doesn't change frequency.  
> This is not a big deal because I can tap A->B to force the frequencies equal, but does anyone know if this is usual or if I have something set wrong?
>
> f/w 3.77
>   
>