[Elecraft] ERR TXF

[Jorge Diez - CX6VM]

Thanks to all for the help. So seems I need to know how to seup filters.

I see in the utility program about "Configure Cristal Filters, but I don´t
know what I need to put there in my case.

I have the 400 hz and the 1.8 khz in the mail and the same filters in the
subRX, so I have four filters, 2 x 400hz and 2 x 1.8khz

Thanks!
73,
Jorge
CX6VM

-----Mensaje original-----
De: Don Wilhelm [mailto:w3fpr at embarqmail.com] 
Enviado el: Sábado, 06 de Marzo de 2010 09:28 p.m.
Para: Jorge Diez - CX6VM
CC: elecraft at mailman.qth.net
Asunto: Re: [Elecraft] ERR TXF

Jorge,

That message tells you that you do not have the Transmit filter set 
correctly - use K3 Utility and set the CW and SSB transmit filter to the 
2.7 (or 2.8) kHz filter.  If you have the 6 kHz filter, select it for AM 
Transmit, and if the 13 kHz filter, select it for FM transmit.

73,
Don W3FPR

Jorge Diez - CX6VM wrote:
> Hello,
>
>  
>
> I have a ERR TXF message in the display of the K3 when I hold TUNE or when
I
> press XMIT.
>
>  
>
> Also I cannot do the calibrate transmitter gain in the utility software
> because of this TXF
>
>  
>
> Any idea what´s wrong?
>   
>