[Elecraft] ERR TXF

[Joe Subich, W4TV]

> That message tells you that you do not have the Transmit filter 
> set correctly - use K3 Utility and set the CW and SSB transmit 
> filter to the 2.7 (or 2.8) kHz filter. 

Also realize that you can not set the default (2.7 or 2.8 KHz) 
roofing filter to a width other than 2.7 or 2.8 KHz - this is 
one case where the width must be set accurately.   

73, 

   ... Joe, W4TV 
 


> -----Original Message-----
> From: elecraft-bounces at mailman.qth.net 
> [mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Don Wilhelm
> Sent: Saturday, March 06, 2010 6:28 PM
> To: Jorge Diez - CX6VM
> Cc: elecraft at mailman.qth.net
> Subject: Re: [Elecraft] ERR TXF
> 
> 
> Jorge,
> 
> That message tells you that you do not have the Transmit filter set 
> correctly - use K3 Utility and set the CW and SSB transmit 
> filter to the 
> 2.7 (or 2.8) kHz filter.  If you have the 6 kHz filter, 
> select it for AM 
> Transmit, and if the 13 kHz filter, select it for FM transmit.
> 
> 73,
> Don W3FPR
> 
> Jorge Diez - CX6VM wrote:
> > Hello,
> >
> >  
> >
> > I have a ERR TXF message in the display of the K3 when I 
> hold TUNE or 
> > when I press XMIT.
> >
> >  
> >
> > Also I cannot do the calibrate transmitter gain in the utility 
> > software because of this TXF
> >
> >  
> >
> > Any idea what´s wrong?
> >   
> >
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html