[Elecraft] I cannot TX with Heil connected in the back of the K3

[Jorge Diez - CX6VM]

Hardy,

Something wrong when sending to your email directly

-----Mensaje original-----
De: Jorge Diez - CX6VM [mailto:cx6vm.jorge at adinet.com.uy] 
Enviado el: Sábado, 06 de Marzo de 2010 09:12 a.m.
Para: 'Hardy Landskov'
Asunto: RE: [Elecraft] I cannot TX with Heil connected in the back of the K3

Tks Hardy.  Your response was very useful and we got the Heil headset
working in the rear.  Knew about the rear and front toggle, but not about
the Hi-Lo toggle.  Also found the bias that needs to be on for some Heils,
and off for others

73

Dale at CW5W

-----Mensaje original-----
De: Hardy Landskov [mailto:n7rt at cox.net] 
Enviado el: Viernes, 05 de Marzo de 2010 05:30 p.m.
Para: Jorge Diez - CX6VM
Asunto: Re: [Elecraft] I cannot TX with Heil connected in the back of the K3

I had trouble like that too. Could not get the ALC to register on the meter.

It turns out the Heil HC4 microphone element is low output. Switch your MIC 
to rP.H (rear panel) or FP.H (front panel).   The H  puts in another 
amplifier for the low output Heil mics.
GL N7RT


----- Original Message ----- 
From: "Jorge Diez - CX6VM" <cx6vm.jorge at adinet.com.uy>
To: <elecraft at mailman.qth.net>
Sent: Friday, March 05, 2010 10:50 AM
Subject: [Elecraft] I cannot TX with Heil connected in the back of the K3


Hello,



I connected the Heil with Kenwood adapter in the front of the K3 and the
footswitch in the kenwood adapter also and works.



I wanted to connect the microphone Heil and the footswitch in the back, so I
went to the MENU to select rear connection for the mic, connected mic to
"mic mono" and footswitch to "PTT IN"



I use an adapter to connect the stereo plug of my Heil footswitch to the RCA
in the back of the K3 (PTT IN")



With the K3 turned on, when I connected the footswitch in PTT IN the radio
went to TX, so I turned it of. Then I turned it on with footswith connected
and is OK in RX mode, but doesn´t go to TX when I press the footswitch.



What can I do to use the footswitch in the back of the radio?



We need the only kenwood adapter we have to use in the TS850, so we have to
connect the other Heil (without kenwood adapter) in the back of the K3, both
mic and footswitch.



Thanks in advance!



73,

Jorge

CX6VM/CW5W

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html