[Elecraft] N1MM config questions

[Dick Dievendorff]

I stand corrected.   If you want to key the Accessory port FSK input from a
RS-232 Tx Data line, you'll need the switch.

Dick, K6KR


-----Original Message-----
From: elecraft-bounces at mailman.qth.net
[mailto:elecraft-bounces at mailman.qth.net] On Behalf Of Jim Brown
Sent: Friday, March 05, 2010 12:36 PM
To: Elecraft at mailman.qth.net
Subject: Re: [Elecraft] N1MM config questions

On Fri, 5 Mar 2010 12:29:23 -0800, Dick Dievendorff wrote:

>N1MM can activate the PTT and CW keying lines, but you'll need to fashion
or
>acquire a single-transistor switch (see http://aa5au.com/rttyinterface.html
>for examples) for the DTR and/or RTS lines. 

NO you don''t!  The K3 has this stuff built in, and it works great --
there's 
a menu setting to turn it on and off. Study the menu settings in the manual 
and you'll find it.

73,

Jim K9YC 


______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft at mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html