[Elecraft] K3 Vox settings per mode

[Greg]

Also check your VOX  level in the menu.  It needs to be turned up very 
high when using it for digital modes.  You are correct to use DataA for 
PSK and other audio based digital  modes.  AFSK can be used for RTTY and 
gives you the advantage of using the dual peak filters.  Other than that 
there's no difference between AFSK and DataA.

73
Greg
AB7R


On 6/21/2010 8:40 PM, Brett Howard wrote:
> I'd have to go check but I'm pretty sure that VOX is remembered per
> band/per mode so you just have to set it that way and it should remember
> it.
>
> ~Brett (N7MG)
>
> On Mon, 2010-06-21 at 20:36 -0700, Brandon673 wrote:
>    
>> So no solution? I want VOX to be on no matter what band im on when i select Data Mode. Anytime I change out of Data mode I want VOX to be off. Otherwise when I switch from doing digital modes i occasionally forget to turn VOX off and i go into TX.
>>
>> Brandon
>>
>>
>> On Jun 21, 2010, at 8:32 PM, Joe Subich, W4TV-4 [via Elecraft] wrote:
>>
>>      
>>>   >  Is there something I'm missing? I am unable to setup my K3 to use
>>>   >  VOX anytime its in digital mode without it changing my SSB modes
>>>   >  also over to VOX.
>>>
>>> That's the way the K3 operates.
>>>
>>> There are two mode groups; CW/FSK D/PSK D and SSB/AM/FM/DATA A/AFSK A.
>>> Note the "A" in DATA A and AFSK A ... that indicates "Audio" where the
>>> "D" in FSK D/PSK D indicates "direct" as in direct keying.  VOX applies
>>> to the "Audio" group as a whole.
>>>
>>> 73,
>>>
>>>      ... Joe, W4TV
>>>
>>> On 6/21/2010 11:01 PM, Brandon673 wrote:
>>>        
>>>> Is there something I'm missing? I am unable to setup my K3 to use VOX anytime
>>>> its in digital mode without it changing my SSB modes also over to VOX. I
>>>> only use VOX for Digital Modes and never use it for SSB/FM/AM. Does anyone
>>>> else have this issue or know if there is a fix for it? Is this a firmware
>>>> issue?
>>>>          
>>> ______________________________________________________________
>>> Elecraft mailing list
>>> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>>> Help: http://mailman.qth.net/mmfaq.htm
>>> Post: mailto:[hidden email]
>>>
>>> This list hosted by: http://www.qsl.net
>>> Please help support this email list: http://www.qsl.net/donate.html
>>>
>>>
>>> View message @ http://elecraft.365791.n2.nabble.com/K3-Vox-settings-per-mode-tp5207116p5207162.html
>>> To unsubscribe from K3 Vox settings per mode, click here.
>>>
>>>        
>>
>>      
>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
>