[Elecraft] K3 Vox settings per mode
Brett Howard
brett at livecomputers.com
Mon Jun 21 23:40:01 EDT 2010
I'd have to go check but I'm pretty sure that VOX is remembered per
band/per mode so you just have to set it that way and it should remember
it.
~Brett (N7MG)
On Mon, 2010-06-21 at 20:36 -0700, Brandon673 wrote:
> So no solution? I want VOX to be on no matter what band im on when i select Data Mode. Anytime I change out of Data mode I want VOX to be off. Otherwise when I switch from doing digital modes i occasionally forget to turn VOX off and i go into TX.
>
> Brandon
>
>
> On Jun 21, 2010, at 8:32 PM, Joe Subich, W4TV-4 [via Elecraft] wrote:
>
> >
> > > Is there something I'm missing? I am unable to setup my K3 to use
> > > VOX anytime its in digital mode without it changing my SSB modes
> > > also over to VOX.
> >
> > That's the way the K3 operates.
> >
> > There are two mode groups; CW/FSK D/PSK D and SSB/AM/FM/DATA A/AFSK A.
> > Note the "A" in DATA A and AFSK A ... that indicates "Audio" where the
> > "D" in FSK D/PSK D indicates "direct" as in direct keying. VOX applies
> > to the "Audio" group as a whole.
> >
> > 73,
> >
> > ... Joe, W4TV
> >
> > On 6/21/2010 11:01 PM, Brandon673 wrote:
> > >
> > > Is there something I'm missing? I am unable to setup my K3 to use VOX anytime
> > > its in digital mode without it changing my SSB modes also over to VOX. I
> > > only use VOX for Digital Modes and never use it for SSB/FM/AM. Does anyone
> > > else have this issue or know if there is a fix for it? Is this a firmware
> > > issue?
> > ______________________________________________________________
> > Elecraft mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/elecraft
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:[hidden email]
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> >
> > View message @ http://elecraft.365791.n2.nabble.com/K3-Vox-settings-per-mode-tp5207116p5207162.html
> > To unsubscribe from K3 Vox settings per mode, click here.
> >
>
>
More information about the Elecraft
mailing list