[Elecraft] ...about the PR6...

[Bill W4ZV]

KK7P wrote:
> 
> 
>> Am I correct in gathering that the PR6 is a RECEIVE-ONLY preamp
> 
> yes
> 
>>  (i.e. 
>> that it can't be used with the same antenna/feed line as the TX? (vide 
>> p. 3 manual).
>>   
> 
> no
> 
> It is in the receive path after the T/R switch in the K3.  SO, for 
> example, I use my SteppIR antenna for Tx and Rx on 6m, and the PR6 is in 
> the path on Rx and out of the path on Tx.
> 

Just to clarify, I believe a KXV3/3A is required in addition to the PR6 for
Lyle's description to work.  The PR6 is enabled by RX ANT (on 6m only) and
switched out of the circuit when ANT1 or ANT2 is enabled on the HF bands.

-- 
View this message in context: http://elecraft.365791.n2.nabble.com/about-the-PR6-tp5205322p5205794.html
Sent from the Elecraft mailing list archive at Nabble.com.