[Elecraft] Loose KIO3 I/O Module?

[K2QI]

FWIW, my KIO3 inputs are snug with no movement.  Check the assembly as Don
suggested; something doesn't sound right if you're experiencing significant
lateral movement.

Vy 73 de James K2QI

>
>
>
> NZ8J wrote:
> > Hi,
> >
> > I just purchased an  K3 from another ham and noticed when I was hooking
> > things up that the KIO3 I/O module seems to be very loose. ( the plug-in
> > jacks move up and down quite a bit and are very loose).
> > Is this a normal condition?  There doesn't appear to be any support for
> > this module other than the friction fit of the pins plugging into the
> > KIO3 mother board. I haven't noticed any abnormal operation, I was just
> > curious if this is normal after the K3 has been used a while, (this one
> > is about 18 months old)  or something that I should look into further.
> >
> >
>  ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>