[Elecraft] P3 Questions

[Alan Bloom]

Hi Doug,

You found a misprint in the manual.  Full-screen waterfall is in the
works but it's not there yet.  It turns out that for technical reasons
it is harder to implement than you might think.  But it is definitely on
the list.

Alan N1AL


On Sat, 2010-07-31 at 20:35 -0400, Doug Joyce wrote:
> Full screen waterfall seems to be one of the settings -  see the manual page 
> 14 under "Configuring the Display".
> 
> 73,  Doug  VE3MV
> 
> ----- Original Message ----- 
> From: "The Smiths" <notforchat at hotmail.com>
> To: "Lyle Johnson" <kk7p at wavecable.com>
> Cc: "Elecraft Email" <elecraft at mailman.qth.net>; "Jim Harris" <w0em at q.com>
> Sent: Saturday, July 31, 2010 8:06 PM
> Subject: Re: [Elecraft] P3 Questions
> 
> 
> >
> > If I'm not mistaken the p3 will only go down to a 2KHz display. That seems 
> > VERY wide an area to view for a cw guy who is trying to use the display to 
> > zero beat on a cw signal using the 50 hz filter width.
> > That and the ability to adjust the notch filter just above or below the 
> > zero beat freq.
> > Is there any talk about software to zoom in to  a smaller region like 100 
> > or 200 Hz for example?
> > The p3 can be used for more than just finding signals across an entire 
> > band. I see great uses for it as a convenient spectrum analyzer.
> >
> > Also, is there a reason that you can't toggle into full screen waterfall 
> > display?  I can see this being very helpful to the digital mode guys.
> >
> >>
> >
> 
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft at mailman.qth.net
> 
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html