[Elecraft] P3 Questions

[Doug Joyce]

Full screen waterfall seems to be one of the settings -  see the manual page 
14 under "Configuring the Display".

73,  Doug  VE3MV

----- Original Message ----- 
From: "The Smiths" <notforchat at hotmail.com>
To: "Lyle Johnson" <kk7p at wavecable.com>
Cc: "Elecraft Email" <elecraft at mailman.qth.net>; "Jim Harris" <w0em at q.com>
Sent: Saturday, July 31, 2010 8:06 PM
Subject: Re: [Elecraft] P3 Questions


>
> If I'm not mistaken the p3 will only go down to a 2KHz display. That seems 
> VERY wide an area to view for a cw guy who is trying to use the display to 
> zero beat on a cw signal using the 50 hz filter width.
> That and the ability to adjust the notch filter just above or below the 
> zero beat freq.
> Is there any talk about software to zoom in to  a smaller region like 100 
> or 200 Hz for example?
> The p3 can be used for more than just finding signals across an entire 
> band. I see great uses for it as a convenient spectrum analyzer.
>
> Also, is there a reason that you can't toggle into full screen waterfall 
> display?  I can see this being very helpful to the digital mode guys.
>
>>
>