[Elecraft] K3 cross-band split

[Joe Subich, W4TV]

You can not transmit on VFO B if VFO B and VFO A are on
different bands.  That is a limitation of the K3.

73,

    ... Joe, W4TV


On 7/9/2010 8:12 PM, Craig D. Smith wrote:
> Thanks, Don, for the suggestions.
>
> I did have VFO IND set to "Yes".  I'm also using a dedicated RX antenna on
> the AUX input of the subRX.   So both of those seem to be set up OK.
>
> 73   Craig  AC0DS
>
> <>  Do you have the menu set to VFO IND?  If not, you cannot operate the K3
> <>  cross-band split.
> <>  Do note the caution documented in the manual at the end of page 37.
> <>
>