[Elecraft] K3 cross-band split

[Don Wilhelm]

Craig,

In that case, I would investigate what commands N1MM is sending to the K3.

73,
Don W3FPR

Craig D. Smith wrote:
> Thanks, Don, for the suggestions.
>
> I did have VFO IND set to "Yes".  I'm also using a dedicated RX antenna on
> the AUX input of the subRX.   So both of those seem to be set up OK.
>
> 73   Craig  AC0DS
>
> <> Do you have the menu set to VFO IND?  If not, you cannot operate the K3
> <> cross-band split.
> <> Do note the caution documented in the manual at the end of page 37.
> <> 
>
>