[Elecraft] 6 Meter Output From KRC2

[Don Wilhelm]

Scott,

KRC2 firmware version 1.5 *should* include 6 meters?  Have you tried to 
see if the XV1 outputs activate when the K3 is set to 6 meters?  It is 
supposed to be activated by the AUXBUS.
Jack Brindle's post of 5/30/2010 makes a definitive statement:
-------------------------------------------------------

The latest KRC2 code adds 6-meter support for the K3. It enables the XV1 terminal when the K3 indicates it is on 6 meters, and when cycling through the band selections with the F1 and F2 keys.

Jack Brindle, W6FB

------------------------------------------------------

Have you tried downloading a fresh copy of the KRC2 Download Program?

73,
Don W3FPR

Scott Prather wrote:
> I have a KRC2 that, among other things, I would like to use to switch
> between an HF antenna below 30 MHz and a 6 M antenna when the 50 MHz band is
> selected. My KRC2 microcontroller came with V1.5 from the factory.
>
> snip...
>
> I can't get the KRC2 configuration utility to work (it will connect long
> enough to read the FW version then loose connectivity), so setting an
> alternative bandmap isn't possible using this tool. Has anyone learned the
> secret for setting a stand-alone switched output on 6 meters from the KRC2?
> Will XV1 be enabled for 6 meters if a certain jumper is installed?
>
>
>