[Elecraft] K3 and N1MM setup problem (Operator Error I suspect)

[Don Wilhelm]

Tony,

Do you have the main menu for MIC+LIN to ON?
Have you set the Line IN gain for those voice files? 
See the  menu listing on page 52 of the manual to understand how to set 
the Line IN gain.

73,
Don W3FPR

Tony McClenny wrote:
> I have the K3 connected to my computer via RS-232 cable for rig control
> (works fine DX4Win logging and N1MM).  I have two audio cables from the K3
> to the computer sound card, which work fine for rtty, PSK, etc.  K3 PTT-KEY
> is set to rts-dtr.
>
> When I click on the N1MM function key to transmit a voice file, the rig goes
> into transmit mode BUT the voice file is not transmitted or if it is, I
> cannot hear it in my headphones or via K3 speaker.  The RF meter on the K3
> does not indicate any outgoing power.  
>
> Can you determine from this information what I am missing?  Thank you for
> your consideration.
>   
>